The Eltron Company P310 - Manual (Page 23)

2.2 OPERATION
2.2.1 Controls and Indicators
Figure 2-11 shows the push-button switch and LEDs (light emitting diodes) that appear on
the front of the Printer. The Power Switch resides on the rear. Users press the Printer
Button to reinitialize P310 printers. Users also press this button to signal when a user
intervention has corrected an Alert condition that has suspended operations.
2.2.2 Front Panel LED Signals
Conditions
LED Signals
Power Off (Check Cord, Power Switch, etc.) Off Off Off
Processing Alert (Preparing to Print) Flashing Off Off
Card Alert (Check Card Feed Hopper) On On Off
Ribbon Alert (Check Ribbon) On Flashing Off
Printer Alert (Check Head Down, Card Jam, Command Error) On Off On
Encoder Alert (Check Card Stripe Side, Command Error) On Off Flashing
Cleaning Alert (Time to Run Cleaning Card Sequence) On Flashing Flashing
Print Head Alert (Too Hot, Wait for Automatic Recovery) Flashing Flashing Flashing
980264-001 Rev. B
2-9
CHAPTER 2
Figure 2-11. Controls and Indicators