Toshiba DR430KU - Manual (Page 91)

91 EN EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
2
HDMI Audio (Default : ON)
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUT jack to your audio system,
etc.), you can set the HDMI audio output off.
Use [ K / L] to select a setting, then press [ENTER].
• Set to “OFF” when the HDMI sound is not output.
HDMI Audio
ON
OFF
Your setting will be activated.
3
RGB Range (Default : Normal)
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [ K / L] to select a setting, then press [ENTER].
• Select “Enhanced“ if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
RGB Range
Normal
Enhanced
Your setting will be activated.
4
HDMI CEC (Default : OFF)
You can control all HDMI-CEC compatible components
connected via HDMI cable by simple button operations of
remote control of this unit.
In order to enable the function you need to set “HDMI
CEC” to “ON”.
Use [
K / L] to select a setting, then press [ENTER].
HDMI CEC
ON
OFF
GENERAL SETTING
HDMI (cont’d)
Functions available for the HDMI-CEC
• One touch play
When the operations with following buttons of this
unit’s remote control are performed, the TV will
automatically turned on and switch to appropriate input
channel.
Buttons for one touch play:
[TIMER PROG.], [SETUP], [INPUT SELECT ],
[PLAY B], [TOP MENU], [MENU/LIST]
• System information
Get & Set Menu Language: This unit recognizes the
OSD language set for the TV and automatically set the
same language as the player menu language (OSD
menu language) for this unit.
Power off: When you turn the TV off, this unit and all
equipment connected via HDMI will automatically turns
off except during recording on the unit.
Receiving operational signal from TV’s remote
control: You can operate this unit with TV’s remote
control. Check your TV owner’s manual for details.
Note
• This function may not work properly depending on the TV
you are connecting.
• The available operation may differ depends on the TV’s
remote control you use.
• Other components must be compatible with HDMI-CEC in
order to use this function.