Toshiba DR430KU - Manual (Page 11)

11 EN EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
FUNCTIONAL OVERVIEW
Front Panel
Rear Panel
1. I/ y y ON/STANDBY button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit, you
must unplug the AC power cord.)
• If timer programmings have been set, press to turn the unit
into the timer-standby mode.
2. Disc tray
• Place a disc when the disc tray is opened.
3. A OPEN/CLOSE button*
• Press to open or close the disc tray.
4. Infrared sensor window
• Receive signals from your remote control so that you can
control the unit from a distance.
5. Display
• Refer to “FRONT PANEL DISPLAY GUIDE” on page 17.
6. HDMI indicator
• Lights up and indicates the HDMI video resolution when
HDMI output is on.
7. SKIP H button
• During playback, press once midway through a chapter or
track to go back to the beginning of the current chapter
or track. When pressed twice in quick succession, playback
will start from the preceding chapter or track.
• During playback, press and hold for 1.5 seconds to fast
reverse.
• When playback is paused, press to play back reverse step
by step.
• When playback is paused, press and hold for 1.5 seconds to
slow reverse.
1. VIDEO IN jack (L1)
• Use to connect external device with an RCA video cable.
2. VIDEO OUT jack
• Use to connect a TV monitor, AV receiver or other device
with an RCA video cable.
3. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video inputs
with a component video cable.
4. HDMI OUT jack
• Use an HDMI cable to connect to a display with an HDMI
compatible port.
5. AC Power Cord
• Connect to a standard AC outlet to supply power to this
unit.
• Unplug this cord from the AC outlet to completely shut
down the unit.
6. COAXIAL DIGITAL AUDIO OUTPUT jack
• Use to connect an AV receiver, Dolby Digital decoder, DTS
decoder or other device with a digital audio coaxial input
jack with a digital audio coaxial cable.
7. S-VIDEO OUT jack
• Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
8. AUDIO OUT jacks
• Use to connect a TV monitor, AV receiver or other device
with an RCA audio cable.
9. S-VIDEO IN jack (L1)
• Use to connect the S-video output of external device with
an S-video cable.
10. AUDIO IN jacks (L1)
• Use to connect external device with an RCA audio cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
IN OUT
Y
PR/CR
PB/CB
L
R
L
R
VIDEO IN VIDEO OUT
S-VIDEO AUDIO IN (L1) S-VIDEO AUDIO OUT
HDMI OUT
COMPONENT VIDEO OUT
COAXIAL
DIGITAL AUDIO OUTPUT PCM / BITSTREAM
5
7 6 9 8 10
3 2 1 4
2 3* 7 8 9 10* 11
13 14 15
5 4 6 1
12
(*) The unit can also be turned on by pressing these buttons.
8. SKIP G button
• During playback, press to skip to the next chapter or track.
• During playback, press and hold for 1.5 seconds to fast
forward.
• When playback is paused, press to play back advance step
by step.
• When playback is paused, press and hold for 1.5 seconds to
slow forward.
9. C STOP button
• Press to stop playback or recording.
10. B PLAY button*
• Press to start or resume playback.
11. I REC button
• Press once to start a recording. Press repeatedly to start
one-touch timer recording.
12. DV IN jack (L3)
• Use to connect the DV output of external device with a DV
cable.
13. AUDIO input jacks (L2)
• Use to connect external device with an RCA audio cable.
14. VIDEO input jack (L2)
• Use to connect external device with an RCA video cable.
15. USB input jack
• You can plug your USB device here, and play back the
contents in it.