Input parameter setting, Setting flow chart, Set the input parameters. (refer to – TOA Electronics A-9060S User Manual
Page 41: P. 41, P. 41, p
41
13.4.1. Setting flow chart
[Normal matrix operation]
13.4. Input Parameter Setting
The screen display examples shown above may differ from actual displays.
The on-screen indications shown in red here (actually shown by flashing cursors)
are parameters or setting contents to be selected with the Parameter setting knob,
input channel selection key or other designated keys.
The indications of the [ ], [ ], [
], and [
] arrows represent that the screen is
switched with the Screen shift key.
Use the Parameter setting knob for each parameter selection.