2 configuring dynamic forwarding addresses – TP-Link TL-SG3109 User Manual
Page 63
![background image](/manuals/212564/63/background.png)
2. Click
. The Add Forwarding Database Page
opens:
Figure 82: Add Forwarding Database Page
3. Define the Interface, MAC Address, VLAN ID or VLAN
Name, and Status fields.
4. Click
. The forwarding database information is
modified, and the device is updated.
8.2 Configuring Dynamic Forwarding Addresses
The Dynamic Addresses Page contains parameters for querying information in the Dynamic MAC Address Table, including
the interface type, MAC addresses, VLAN, and table storing. The Dynamic MAC Address Table contains information about
the aging time before a dynamic MAC address is erased, and includes parameters for querying and viewing the Dynamic
MAC Address table. The Dynamic MAC Address table contains address parameters by which packets are directly forwarded
to the ports. The Dynamic Address Table can be sorted by interface, VLAN, and MAC Address.
To define the dynamic forwarding addresses:
1. Click
System > Bridging Config > Forwarding Database > Dynamic Addresses. The Dynamic Addresses Page
opens:
Figure 83: Dynamic Addresses Page
The Dynamic Addresses Page contains the following fields:
Address Aging (Sec.) — Specifies the amount of
time in seconds that the MAC address remains in the
Dynamic MAC Address table before being timed out, if
no traffic from the source is detected. The default value
is 300 seconds.
Clear Table — Clears the Current Address Table.
The Query by: section contains the following fields:
Interface — Specifies the interface (Port or LAG) for
which the table is queried.
MAC Address — Specifies the MAC address for
which the table is queried.
VLAN ID — Specifies the VLAN ID for which the table
is queried.
Address Table Sort Key —Specifies the means by which the Dynamic MAC Address Table is sorted. The address table
can be sorted by address, VLAN, or interface.
The Current Address Table section displays the parameters of the dynamic addresses defined: VLAN ID, MAC (Address)
and Interface.
2. To browse the addresses, click
.
To query the Dynamic MAC Address Table: