Toshiba SD-37VBSB - Manual (Page 33)

33
Playing a disc
Press OPEN/CLOSE or PLAY on the unit.
The disc tray closes automatically.
On the TV-screen, “
” changes to
“Reading” and then playback
commences.
Press / or / to select title.
Press ENTER.
• Title is selected and play
commences.
Press STOP to end playback.
Resuming facility
• The unit records the stopped point,
depending on the disc. “ ”
appears on the screen. Press
PLAY to resume playback (from
the scene point).
• If you press STOP again (“ ”
appears on the screen.), the unit will
clear the stopped point.
Press ON/STANDBY.
The DVD/VCR turns on.
Press VCR/DVD to select the DVD mode.
The DVD indicator will light.
Press OPEN/CLOSE.
The disc tray opens.
Place a disc on the disc tray.
With the playback
side down
• There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD/VCR to malfunction.
• Do not place a disc which is unplayable in this
DVD/VCR.
1
3
4
5
2
6
7
8
To start playback in the stop mode
Press PLAY.
OR
Reading
This section shows you the basics on how to play a
disc.
Basic playback
Preparations:
• When you want to view a disc, turn on the TV and select
the corresponding video input connected to the DVD. This
may include S-video or component video inputs which are
exclusive to DVD playback.
• When you want to enjoy the sound of discs from the audio
system, turn on the audio system and select the input
connected to the DVD/VCR.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Display window OPEN/CLOSE
STOP Disc tray VCR/DVD
PLAY
ON/STANDBY
2J50101A [EN] P33-36 27/2/06, 5:40 PM 33