12 basic connection – Toshiba SD-37VBSB User Manual
Page 12
12
Basic connection
Connect your DVD/VCR to your home's aerial and to your TV-set as shown in the illustration.
When you have finished these connections then connect your DVD/VCR to the 230 V / 50 Hz mains.
In addition to the coaxial cable connection, you should also connect the supplied SCART cable from the DVD/VCR
to your TV as shown. As well as transferring the high quality pictures and sound to your TV, the SCART connection
can automatically switch the TV to its AV channel for playback.
If your TV-set does not switch to video-playback operation automatically, please turn your TV's video switch to
VIDEO position manually.
Note:
Make sure that both the television and the DVD/VCR are switched off before connecting the cables.
Connect a TV with the Scart socket
TV
AC mains lead 230V/50 Hz
DVD/VCR
Aerial-Input
To Scart socket
RF-Input (from
house aerial)
RGB OUT, Composite IN/
OUT Scart Socket (L1)
RF-Output (to TV)
Aerial
Supplied Coaxial cable
Scart cable
(not supplied)
VCR/DECODER Scart Socket (L2)
2J50101A [EN] P08-13
27/2/06, 5:38 PM
12