Toshiba SD-37VBSB - Manual (Page 26)

26
VCR
Recording a TV Program
1
2
3
“VCR” indicator goes on.
“VCR” indicator goes off.
“VCR” indicator goes on.
You can record a program using the TV
receiver of the DVD/VCR and at the same
time watch another program on the TV set
using its receiver. As the DVD/VCR auto-
matically switches the TV set the following
points should be observed:
Auto Rewind Feature
The DVD/VCR will automatically rewind when
the tape has ended (except during OTR and
TIMER REC). It will also eject the cassette
tape.
Press TV/VCR until “VCR” appears on the display. Select the program
on the DVD/VCR you want to record. This program can be watched on
the screen and recorded by the DVD/VCR.
While the VCR is recording press TV/VCR until the “VCR” indicator on the
display goes off. The TV set now displays the program of its built-in
receiving module. Select the TV channel you want to watch on the TV set.
Although the TV set now shows another program the DVD/VCR will
continue recording the previously selected program.
Using TV/VCR you can switch the TV screen between the DVD/VCR
picture and the TV picture. If the “VCR” indicator is lit on the display, you
will watch the DVD/VCR picture. This has no trouble on the recording.
To Display VCR operation Status
Press CALL. The clock, day of the week and more informations will be
indicated.
To cancel the indicating: Press CALL until all indicator disappear.
REC
4-+
8+4
CH 80 23:59 MON
01:36:58 SP
L CH
HI-FI
Deck-status
here: Stop
Time
Day of the week Indication for
Hi-Fi-playback
or stereo-
reception
(displayed
only for
approx. 4
seconds.)
Program
number or
Scart input
(AV1,AV2 or
AV3)
Indication for the selected
playback sound (e.g.: L CH
= Left Channel) (displayed
only for approx. 4 seconds.) Tape speed
Cassette in
Unit
Real time counter
2J50101A [EN] P25-32 27/2/06, 5:39 PM 26