29 timer recording – Toshiba SD-37VBSB User Manual
Page 29
29
Timer recording
5
--:--
--:--
------
--
13:00
14:30
1
23 MON
--:--
--:--
------
--
--:--
--:--
------
--
--:--
--:--
------
--
--:--
--:--
------
--
------ --:-- --:-- --
------ --:-- --:-- --
-
-
-
-
-
LP
-
-
SELECT :
EXIT : MENU
/ ENTER
1
2
4
3
TIMER REC SET
DATE
WKL-WED
11:30
--:--
2
START
END
CH
SELECT :
SET
:
EXIT
: MENU
SP
SPEED
ON
PDC
/ 0Ð9
--:--
--:--
------
--
--:--
--:--
------
--
--:--
--:--
------
--
--:--
--:--
------
--
--:--
--:--
------
--
25 WED 12:15
13:00
4
23 MON 13:00
14:30
1
-
-
-
-
-
LP
SP
SELECT :
/ ENTER
--:--
--:--
------
-- -
EXIT : MENU
--:--
--:--
------
--
17:30 18:00 7
15 TUE
--:--
--:--
------
--
--:--
--:--
------
--
--:--
--:--
------
--
--:--
--:--
------
--
25 WED 12:15 13:00 4
23 MON 13:00 14:30 1
--
--
-
SP
LP
SP
SELECT :
CLEAR : CANCEL EXIT : MENU
/ ENTER
6
Press ENTER to accept them.
To enter other pro-
grams, repeat steps
2 through 5.
• To return to the
normal screen,
press VCR MENU
twice.
MON-SAT = everyday from
Monday to Saturday
WKL-SAT = each Saturday
Press TIMER REC. The clock symbol (
) will
appear on the display and the DVD/VCR stands by
for recording. At the same time, VCR mode will
change to DVD mode automatically. You can use
DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
• If the clock symbol (
) blinks in the display in
spite of the pressing of TIMER REC, the cassette
may not have been loaded yet. (see page 19)
• If the cassette is ejected in spite of the pressing
of TIMER REC, the erase prevention tab of the
cassette may have been removed. (see page 19)
Notes:
• In case of the timer recording from the scart socket,
proceed as follows: In step 4 press
or
repeatedly
until the "CH" line blinks. Then press
or
repeat-
edly until “AV1” or “AV2” or “AV3” appears.
• If the clock symbol (
) blinks when the timer recording
ended, the TV program has not been completely
recorded because of an insufficient tape supply. Press
TIMER REC to cancel the timer program or press
EJECT on the DVD/VCR to remove the cassette tape.
• During timer recording standby mode, the VCR mode
cannot be selected. To use the VCR, press TIMER
REC at first, then press VCR to change to VCR mode.
After you use the VCR, press TIMER REC again to put
the VCR into timer recording standby mode.
Timer Recording Special Case
Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.g.
MON-SAT: Monday to Saturday) Timer recording
Follow the procedure for timer recording on page 28. At
picture 3 press
or
repeatedly until the desired
setting appears. Then press
. When you press
or
repeatedly, the indicator at DATE will change as
follows, in case today is Friday.
In case of Timer programs-overlapping
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as
shown in the diagram below.
Notes:
• The daily/weekly recording can be made continuously until
the recording is canceled or the tape reaches the end.
• During timer recording the automatic rewinding mecha-
nism does not function.
Confirmation / Cancellation of the Timer
Recording
If the Timer has been activated, now press TIMER
REC to deactivate the Timer. The clock symbol (
)
will disappear. Then press VCR to change to VCR
mode.
Press PROGRAM. All the 8 Timer memories will
appear.
To cancel Timer program: Press
or
to select
the written line. Then press CANCEL. This line is
now canceled.
Press VCR MENU (or PROGRAM) repeatedly until
the TV-picture appears.
One month later
minus one day
SUN-SAT 25 FRI ..... 24 SUN WKL-FRI
MON-SAT MON-FRI WKL-THU.....WKL-SAT
8 : 00
11 : 00
9 : 00
10 : 00
Program 1
Program 2
Program 3
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2
Prog.3
Recording
Control Settings
2J50101A [EN] P25-32
27/2/06, 5:39 PM
29