beautypg.com

Toshiba M40 User Manual

Page 98

background image

3 Diagnostic Programs

3.5 System Test

32 EQUIUM M40/M45/ Satellite M40/M45 Maintenance Manual

1. DMA Controller

This test item is to check whether the DMA controller works normally.

2. Interval Timer

This test item is to check whether the Interval Timer (18.2Hz, 55ms) works
normally.

3. Clock/Calendar

This test item is to check whether the system clock/calendar works
normally.

4. PCI System

This test item is to check whether the bus number, device number and
function number in PCI bus are valid.

5. Plug and Play

This test item is to check:

1. Whether the current system supports Plug-n-Play;
2. Whether there is an ESCD (Extended System Configuration Data) in
the BIOS;
3. Whether there is PCI-to-ISA bridge in the system;
4. Whether there is PCI bus in the system.

6. ACPI Test

ACPI test includes two sub-items as below:
System Address Map Test: Check the correctness of ACPI system memory
map, and whether its mapping scope is within real memory.
ACPI Table Test: Check the correctness of ACPI relative configuration
tables in the current system.

Subtest 03 FAN Speed Test

1. CPU Fan Speed Test

This test item is to check whether the CPU fan currently used works
normally in the different speeds of stop, slow, middle and fast.