Toshiba M40 - Manual (Page 164)

4 Replacement Procedures 4.6 Speaker Cover and Keyboard
Figure 4-20 Removing the keyboard
Installing the Speaker Cover and Keyboard
Install the speaker cover and keyboard according to the following procedures and Figure 4-
19, 4-20.
1. Connect the keyboard cable on main board connector CN7 and put it on correct
position.
2. Securing the keyboard with two M2.5x2.6 black bind screws.
3. Please the speaker cover in the correct position and fasten the following 8 latches, in
that order:
- Two bottom latches
- One latch on the left and right sides
- Four front latches
4. Close the display and turn the computer over.
4-30 EQUIUM M40/M45 / Satellite M40/M45 Maintenance Manual