beautypg.com

Toshiba M40 User Manual

Page 177

background image

4.11 North Bridge thermal module

4 Replacement Procedures

EQUIUM M40/M45 / Satellite M40/M45 Maintenance Manual

4-43

Installing the Removing North Bridge thermal module

Install the Removing North Bridge thermal module according to the following procedures
and Figure 4-31.

1. Place the north bridge thermal module in the correct position and push the clip in

correct position on the system board.

2. Secure two north bridge thermal module screws.

3. Connect the North Bridge thermal module cable to the CN511 on the system board.

4. Stick EMI tape on north bridge thermal module left and right side.