Thecus Technology i Series - Manual (Page 69)

Warning VG Created Fail Warning: Fail to create VG .
Info VG Deleted Info: VG has been deleted.
Info UDV Created OK Info: UDV has been created.
Warning UDV Created Fail Warning: Fail to create UDV .
Info UDV Deleted Info: UDV has been deleted.
Info UDV Attached OK Info: UDV has been LUN-attached.
Warning UDV Attached Fail Warning: Fail to attach LUN to UDV .
Info UDV Detached OK Info: UDV has been detached.
Warning UDV Detached Fail Warning: Fail to detach LUN from Bus
SCSI_ID LUN .
Info UDV_OP Rebuild
Started Info: UDV starts rebuilding.
Info UDV_OP Rebuild
Finished Info: UDV completes rebuilding.
Warning UDV_OP Rebuild
Fail Warning: Fail to complete UDV
rebuilding.
Info UDV_OP Migrate
Started Info: UDV starts migration.
Info UDV_OP Migrate
Finished Info: UDV completes migration.
Warning UDV_OP Migrate
Failed Warning: Fail to complete UDV
migration.
Warning VG Degraded Warning: VG is under degraded mode.
Warning UDV Degraded Warning: UDV is under degraded
mode.
Info UDV Init OK Info: UDV completes the initialization.
Warning UDV_OP Stop
Initialization Warning: Fail to complete UDV
initialization.
Warning UDV IO Fault Error: IO failure for stripe number in
UDV .
Warning VG Failed Error: Fail to access VG .
Warning UDV Failed Error: Fail to access UDV .
Warning Global CV
Adjustment Failed Error: Fail to adjust the size of the global cache.
Info Global Cache Info: The global cache is OK.
Error Global CV Creation
Failed Error: Fail to create the global cache.
Info UDV Rename Info: UDV has been renamed as
.
Info VG Rename Info: VG has been renamed as
.
Info Set VG Dedicated
Spare Disks Info: Assign Disk to be VG
dedicated spare disk.
Info Set Global Disks Info: Assign Disk to the Global Spare
Disks.
Info UDV Read-Only Info: UDV is a read-only volume.
Info WRBK Cache
Policy Info: Use the write-back cache policy for UDV
.
Info WRTHRU Cache
Policy Info: Use the write-through cache policy for UDV
.
Info High priority UDV Info: UDV is set to high priority.
Info Mid Priority UDV Info: UDV is set to mid priority.
Info Low Priority UDV Info: UDV is set to low priority.
Error PD configuration Error: PD lba <#> length <#> config
- 69 -