Thecus Technology i Series - Manual (Page 67)

Info SES load conf. OK Info: SES configuration has been loaded.
Warning SES Load Conf.
Failure Error: Failed to load SES configuration. The
SES device is disabled.
Info SES is disabled Info: The SES device is disabled.
Info SES is enabled Info: The SES device is enabled
• Environmental events
Level Type Description
Info Admin Login OK Info: Admin login from via
.
Info Admin Logout OK Info: Admin logout from
via .
Info iSCSI data port
login Info: iSCSI login from (Number>) succeeds.
Warning iSCSI data port
login reject Warning: iSCSI login from (Number>) was rejected, reason of
1.
initiator error
2. authentication failure
3. authorization failure
4. target not found
5. unsupported version
6. too many connections
7. missing parameter
8. session does not exist
9. target error
10. out of resources
11. unknown
Error Thermal critical Error: System Overheated!!! The system will do
the auto shutdown immediately.
Warning Thermal warning Warning: System temperature is a little bit
higher.
Error Voltage critical Error: System voltages failed!!! The system will
do the auto shutdown immediately
Warning Voltage warning Warning: System voltage is a little bit
higher/lower.
Info PSU restore Info: Power is restored to work.
Error PSU Fail Error: Power is out of work.
Info Fan restore Info: Fan is restore to work.
Error Fan Fail Error: Fan is out of work.
Error Fan non-exist Error: System cooling fan is not installed.
Error AC Loss Error: AC loss for the system is detected.
Info UPS Detection OK Info: UPS detection succeed
Warning UPS Detection Fail Warning: UPS detection failed
Error AC Loss Error: AC loss for the system is detected
Error UPS power low Error: UPS Power Low!!! The system will do the
auto shutdown immediately.
Info Mgmt Lan Port
Active Info: Management LAN Port is active.
Warning Mgmt Lan Port
Failed Warning: Fail to manage the system via the
LAN Port.
Info RTC Device OK Info: RTC device is active.
- 67 -