Figure 3.8.1, 1 upgrade, Figure 3.8.1.1 – Thecus Technology i Series User Manual
Page 55: Figure 3.8.1.2, 2 info
Figure 3.8.1
3.8.1
Upgrade
Enter “Upgrade” function to upgrade firmware. Please prepare new firmware file
named “xxxx.bin” in local hard drive, then press “
” to select the file.
Click “
”, it will pop up a message “Upgrade system now? If
you want to downgrade to the previous FW later, please export your system
config first”, click “Cancel” to export system config first, then click “OK” to start
to upgrade firmware.
Figure 3.8.1.1
Figure 3.8.1.2
When upgrading, there is a progress bar running. After finished upgrading, the
system must reboot manually.
Tips
Please contact with www.thecus.com for latest firmware.
3.8.2
Info
Enter “Info” function will display system information (including firmware version),
CPU type, installed system memory, and controller serial number.
- 55 -