Thecus Technology i Series - Manual (Page 41)

Example 2 is to create two UDVs. One shares global cache volume, the other
uses dedicated cache volume. Set a dedicated spare disk.
• Example 1
Example 1 is to create two UDVs in one VG, each UDV uses global cache
volume. Global cache volume is created after system boots up automatically. So,
no action is needed to set CV. Then set a global spare disk. The last, delete all of
them.
Step 1:
Create VG (Volume Group).
To create the volume group, please follow the procedures:
Figure 3.6.7.1
1. Select “/ Volume config / Volume group”.
2. Click “
“.
3. Input a VG Name, choose a RAID level from the picklist, press
“ “ to choose the RAID PD slot(s), then press
“ “.
4. Check the outcome. Press “ “ if all setups are
correct.
5. Done. A VG has been created.
- 41 -