Thecus Technology i Series - Manual (Page 54)

(%)
function.
Shutdown
Delay (s)
If power failure occurred, and the system can not
return back to the setting value period, the system will
shutdown. Setting delay to “0” will disable the
function.
Shutdown
UPS
Select ON, when power is gone, UPS will shutdown by
itself after the system shutdown successfully. After
power comes back, UPS will start working and notify
system to boot up. OFF will not.
Status
The status of UPS.
“Detecting…”
“Running”
“Unable to detect UPS”
“Communication lost”
“UPS reboot in progress”
“UPS shutdown in progress”
“Batteries failed. Please change them NOW!”
Battery Level
(%)
Current percentage of battery level.
3.8 System maintenance
“Maintenance”
function allows operation of the system functions including
“Upgrade” to the latest firmware, “Info” to show the system version, “Reset to
default
” to reset all controller configuration values to origin settings, “Config
import & export
” to export and import all controller configuration except for
VG/UDV setting and LUN setting, and “Shutdown” to either reboot or shutdown
the system.
- 54 -