Thecus Technology i Series - Manual (Page 43)

Figure 3.6.7.4
(Figure 3.6.7.4: Create UDVs named “UDV-1” and “UDV-2”, related to “VG-R0”, the size of
“UDV-1” is 50GB, the size of “UDV-2” is 98GB. The status of these UDVs are online, write
back, high priority with cache volume 383MB. There is no LUN attached.)
Step 3:
Attach LUN to UDV.
There are 2 methods to attach LUN to UDV.
1. In
“/ Volume config / User data volume”
, press
“ ”.
2. In “/ Volume config / Logical unit”, press “ ”.
The procedures are as follows:
Figure 3.6.7.5
1. Select a UDV.
2. Input “Host”, which is an initiator node name for access control, or fill-
in wildcard “*”, which means every host can access this volume.
Choose LUN and permission, then click “
”.
3. Done.
- 43 -