Thecus Technology i Series - Manual (Page 51)

5. LED status: 10 seconds.
Figure 3.7.1
3.7.1 SES configuration
SES represents SCSI Enclosure Services, one of the enclosure management
standards. Enter “SES config” function can enable or disable the management
of SES.
Figure 3.7.1.1
(Figure 3.7.1.1: Enable SES in LUN 0, and can be accessed from every host.)
The SES client software is available at the following web site:
SANtools:
http://www.santools.com/
3.7.2 Hardware monitor
Enter “Hardware monitor” function to view the information of current voltage
and temperature.
- 51 -