Toshiba Strata DK280 - Manual (Page 37)

To Program Speed Dial
Names and Numbers:
Press the Redial
button, then the
Speed Dial button.
2. Dial the desired speed
dial code.
3. Press the Mode
button.
4.
5.
6.
7.
8.
Enter the name or
memo (refer to
Recording a Message
for method).
Press the
Mode
button.
Enter the desired
telephone number (16
digits maximum).
Press the
Redial
button to record data in
memory.
Repeat steps 2-7 to
enter more memos.
To Dial a Speed Dial
Number:
Press the
Mode
button when telephone
is idle.
SPEED DIAL MEMO
This feature allows an user to program a name for each of
his/her 40 personal speed dial numbers. The memo pad of names may be
stepped through to select the appropriate party. Memos may also be added to
the 40 or 100 system speed dial codes, depending on your system’s size, via the
station connected to port 000, station number (usually 200).
Press
SDS or if your telephone is not equipped with a Speed Dial button.
NN or NNN = Speed Dial Code. station) or (60-99 or 600
depending on your particular system size, from station 200 only)
If a name was previously stored on this code, it will display on the top line of the
The name will appear on the bottom line of the LCD as you enter it.
The number will appear on the top line of the LCD as you enter it.
The LCD displays “MODE NO.?”
4-7