Toshiba Strata DK280 - Manual (Page 21)

To Use Station-to-Station
Message Waiting:
1.
2 .
3.
4 .
5.
6.
Lift the handset.
Dial the desired station
number.
The calling station user
presses the Msg
button to set the Msg
LED on the called
station.
To answer the Msg
LED indication from
the called station,
press the Msg button.
To clear the Msg LED
from the calling station,
press the
Intercom
button, dial the station
number and press the
Msg button twice (or
7 7).
To clear the Msg LED
from the called station,
press
Intercom
button, dial # 4 0 9.
3. XX The amount of time seconds) that the telephone will ring
before Forward-No Answer or Forward-Busy/No Answer is
invoked. The ring time does not have to be entered each time Call
is set-on/y when you want to change the number of seconds the telephone
rings before it forwards.
4. if call forward is set:
Central Office (CO) lines-that ring at your station only will forward (CO
lines that ring into more than one station will not forward).
CO fine calls transferred to your station will forward.
n Intercom calls will forward.
n Call forward redirects the station hunt feature.
STATION-TO-STATION MESSAGE WAITING
If there is no answer (busy or DND), press the Msg button (or dial 7). This
causes the Msg LED on the called station to flash. The called station’s LCD
displays the calling station’s number.
When the returned call is answered, the flashing Msg LED will turn off
NOTE:
Up to four message waiting displays may be stored on the LCD. The station
number in the left-most position will be called when the
Msg button is pressed.
To rotate the station numbers, press the Scroll button. The fourth message is
reserved for the Message Center.
2-3