Toshiba Strata DK280 - Manual (Page 24)

4. To cancel the
code, complete Steps
1 and 3, skipping
Step 2.
If the code is canceled, outgoing access of CO lines on calls will
require a security code.
To Add, Delete, or
Change
Override/Traveling Class
Codes:
1. Press
Intercom and
dial the three-digit toll
restriction override
change access code.
2. Dial the four-digit
override code.
TOLL RESTRICTION CLASS CODE
CHANGE
From selected stations the Toll Restriction override or Traveling Class codes can
be changed, added, or deleted.
To add, delete, or change override for Traveling Class Code, steps
must be performed from a station that was selected in system programming.
You will hear a confirmation tone.
You should hear a dial tone. For security reasons, the change access code is not
provided in this guide. It is available from your telephone system administrator.
3. Press the
button to store the
code.
I , , , ,
You will hear a confirmation tone, and the code will be stored in memory. Press
RDL or # if your telephone is not equipped with a
Redial button.
4. Repeat steps 1 4 to
enter up to four
traveling class codes
or two toll restriction
override codes.
2-6