beautypg.com

The display setting menu, Operations using the menus (continued) – Toshiba Data TDP-T420 User Manual

Page 20

background image

8

9

Operations

Using the menus (Continued)

The display setting menu

Use this menu to set screen display-related items.
(The items in gray color cannot be set with the current input selection.)

Item

Description

Screen size Screen size setting

[

or

: Enter setting] [

:Selection] [Enter:

]

Normal/Full/Thru/Wide

Up/down
shift

Lets the projected images shift vertically when the screen size setting is wide
display (within the range of 104 × 768).
Lower the image

Raise the image

Language

Select one of the languages below to use for displaying the menu and messages
[

or

: Enter setting] [

:Selection] [Enter:

]

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/

/ Indonesia

Background Screen to display when there is no input signal

[

or

: Enter setting] [

:Selection] [Enter:

]

Logo/Blue/None

Icon

Display icons as function guides

On

Off

Start-up
screen

Display start-up screen when power is turned on

On

Off

User logo

Display a logo customized by the user for the start-up screen or when there is no
input signal.
[

or

: Enter setting] [

: Selection]

Logo registration

Press

to display the registration menu.

Display style

Logo confirmation

Press

.

Reset logo

Yes

No

Detailed description

[Screen size]

Normal : Enlarge an input image to fit the screen without changing the aspect

ratio of video signals.

Full

: Displays an input image in 104 × 768 dot resolution by enlarging it

to fill the entire screen.

Thru

: Displays an input image in the native resolution of the video signals.

Thru display is not available for Y/P

B

/P

R

, Video and S-Video-input

images.
The larger image than the screen size will be displayed over the
screen. The input image may appear vertically long with some
frequencies of video signals.

Wide

: Displays an input image in the center of the screen with a 16:9 aspect

ratio by enlarging it to fit the width of the screen. The upper and lower
portions of the image will be compressed.
Wide display is not available for Computer-input images.

For Y/P

B

/P

R

input, screen size setting function is not available for the video signals

with a 16:9 aspect ratio.

Note

If you use the screen size setting function on commercial video software,
broadcast or cable-broadcasting programs to display images with the varying
aspect ratio except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.

[Up/down shift]

Shifts the projected image vertically when [

Screen size] is [Wide].

[Background]

TOSHIBA is set for [

Logo] by factory setting.

If user’s logo has been registered, it is displayed when [

Logo] is set for

background.

[Start-up screen]

If user’s logo has been registered and this setting is [

On], the logo is displayed at

start-up.

[User logo]

Registers a part of the image that is input from computer, as a stationary picture and
displays it as a logo at start-up and when no signal is input.