Toshiba Data TDP-T420 - Manual (Page 19)

6 7
Operations
The image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted
are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it
indicates that you cannot select for the current input.)
Item Description
Digital (DVI) Analog (D-SUB)(DVI)
Video S-video
RGB Y/P B /P R RGB Y/P B /P R
Contrast Adjust the image contrast.
Lower Higher
Yes Yes Yes Yes Yes Yes
Brightness Adjust the brightness of the image.
Darker Brighter
Yes Yes Yes Yes Yes Yes
Color Adjust the color of the image.
Lighter Deeper
No Yes No Yes Yes Yes
Tint *1 Adjust the tint of the image color.
Reddish Greenish
No No No No Yes Yes
Sharpness Adjust the sharpness of the image.
Softer Sharper
No Yes No Yes Yes Yes
Picture mode Press . Toggle the picture
mode with .
Bright/Standard/True color
Yes Yes Yes Yes Yes Yes
Advanced
adjustment
Press
to enter the
advanced
adjustment
Noise
reduction
*2
Adjust the screen noise
reduction level.
Softer Stronger
Yes Yes Yes Yes Yes Yes
R-level Adjust red of the image color.
Less red
More red
Yes Yes Yes Yes Yes Yes
G-level Adjust green of the image color.
Less green
More green
Yes Yes Yes Yes Yes Yes
B-level Adjust blue of the image color.
Less blue
More blue
Yes Yes Yes Yes Yes Yes
NTSC
mode
*3
Set the black level with .
US : NTSC (US) mode
JAPAN : NTSC (JAPAN) mode
No No No No Yes Yes
*1: [ Tint] can be displayed and adjusted only when the video signal is set to [NTSC] or [NTSC4.43].
*: [ Noise reduction] may not work depending on signal type.
*: [ NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or
[ NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for
other languages.

Using the menus (Continued)
The position adjustment menu
Use this menu to set or adjust position-related items. Items that can be set or adjusted
are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it
indicates that you cannot select for the current input.)
Item Description
Digital (DVI) Analog (D-SUB)(DVI)
Video S-video
RGB Y/P B /P R RGB Y/P B /P R
Phase Adjust to eliminate flicker with
No No Yes No No No
Frequency Adjust with to eliminate
periodic patterns and flickering
when fine vertical lines appear
on the screen.
No No Yes No No No
H-position Adjust the horizontal position
of the image.
Move left
Move right
No No Yes No No No
V-position Adjust the vertical position of
the image.
Move down
Move up
No No Yes No No No
Clamp pulse 1 Adjust the clamp pulse position.
Lower Higher
No No Yes No No No
Clamp pulse 2 Adjust the clamp pulse width.
Narrower
Wider
No No Yes No No No
