Toshiba RD-XV48KE - Manual (Page 80)

80 EN
3. RGB Range (Default: Normal)
You can adjust the RGB range to make the dark
areas of the HDMI images brighter.
Select a setting using [ U \ D], then
press [ENTER].
• Select “Enhanced” if the black-white contrast is not
clear.
• This setting is effective only for HDMI RGB output.
Your setting is activated.
Reset All
1
In stop mode, press [SETUP]. Select
“General Setting” using [
U \ D],
then press [ENTER].
2
Select “Reset All” using [
U \ D],
then press [ENTER].
3
Select “Yes” using [ U \ D], then
press [ENTER].
“Are you sure?” will appear. Select “Yes” using
[
U \ D], and then press [ENTER].
4
When you finish with the setting,
press [SETUP] to exit.
Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
- Clock setting
- Channel setting
- Parental lock setting
- DivX
® VOD code
- Timer Programmes
RGB Range
Normal
Enhanced
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
General Setting
Reset to factory default?
Yes
No
E3LG0ED_EN.book Page 80 Wednesday, April 30, 2008 11:52 AM