Toshiba RD-XV48KE - Manual (Page 46)

46 EN
6
Repeat steps 4 to 5 until you register
all the titles to be dubbed.
e.g.) HDD A VCR
To delete a title:
1 Go to the dubbing list, then select a title
using [
U \ D]. Then press [ENTER].
2 Select “Delete” using [ U \ D], then press
[ENTER].
3 Select “Yes” using [ U \ D], then press
[ENTER].
To move a title:
1 Go to the dubbing list, then select a title
using [
U \ D]. Then press [ENTER].
2 Select “Move” using [ U \ D], then press
[ENTER].
3 Select a desired insert point using [
U \ D],
then press [ENTER].
To erase all the titles in the dubbing title list:
1 Select “Delete All” in the dubbing menu
using [
U \ D], then press [ENTER].
2 Select “Yes” using [ U \ D], then press
[ENTER]. Final confirmation message will
appear.
3 Select “Yes” using [ U \ D], then press
[ENTER].
• To go back and forth between dubbing menu
and dubbing list, use [ L \ P].
7
After adding all the titles you want,
select “Dubbing Start” in the
dubbing menu using [
U \ D], then
press [ENTER].
8
Select a desired recording mode
using [
L \ P], then press [ENTER].
e.g.) HDD A VCR
Confirmation message will appear.
• Depending on the dubbing direction, the
available recording mode varies.
9
Select “Yes” using [
U \ D], then
press [ENTER].
If dubbing continues when timer recording starts,
the next display will appear.
Dubbing will start.
• It may take awhile to prepare for the dubbing.
To stop the dubbing in progress:
Press [A / C EJECT/STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote
control.
Note
• Dubbing will be cancelled 2 minutes before starting
timer recording.
• You cannot have a Playlist title and an Original title
together in the dubbing list. An Original title in the
dubbing list will be erased if you add a Playlist title to
the dubbing list, or vice versa.
Setting a Disc to Protect
To prevent accidental over-recording, editing or
erasing of recordings, you can protect them using
“Setup” menu.
Insert a recordable disc.
1
In stop mode, press [SETUP].
2
Select “DVD Menu” using [
U \ D],
then press [ENTER].
3
Select “Disc Protect OFF A ON”
using [ U \ D], then press [ENTER].
4
Select “Yes” using [ U \ D], then
press [ENTER].
The disc is protected.
5
Press [SETUP] to exit.
Note
• The Disc Protect setting is available only when a
disc recorded in VR or +VR mode is inserted.
• You can select only “Disc Protect ON A OFF” when
a protected disc is inserted.
To cancel the disc protect:
• Select “Disc Protect ON A OFF” at step 3 , then
select “Yes”.
• If you insert a disc protected with this unit,
“Disc Protect ON A OFF” will appear instead of
“OFF A ON”.
1/1
1.01/01/08 0:00 P01 SP
VCR HDD
Add
Delete All
Dubbing Start
Dubbing List
LP SP
VCR HDD
Please select REC MODE.
Start Dubbing?
Yes
No
Timer Recording is in standby.
Start Dubbing?
Yes
No
DVD-RW DVD-RW
VR
DVD+RW DVD+RW D DVD+R VD+R DVD+R
E3LG0ED_EN.book Page 46 Wednesday, April 30, 2008 11:52 AM