Toshiba Strata CIX IP5000-UG-VB - Manual (Page 204)

References
Button Labels
186
Strata CIX IP5000-series Telephone UG 04/09
Release and
Ans
Release and Answer — Press to disconnect or complete the transfer the current outside
or extension call and automatically answer the new incoming outside or extension call.
Release Call
Release — Press to disconnect or complete the transfer of the current outside or
extension call and to place your station in the idle condition.
SD or
Customized
Button
Speed Dial — Press to Speed Dial a telephone number or feature access codes. SD
buttons can be used as either System Speed Dial numbers or Station Speed Dial
numbers.
Spd Dial Lng
Pause
Pause (Long) — Press to insert a 10-second pause when programming Speed Dial
numbers.
Spd Dial
Pause
Pause — Press to set either a one-half or two-second pause when programming Speed
Dial numbers. (The pause time is set in system programming).
Start
Start — Press to make an outgoing call using an ISDN trunk.
Sub
Sub address — Press to enter a sub address on an ISDN trunk outgoing call.
Tel Set
Music
Background Music — Press to turn Background Music on or off over your station
speaker.
Tone Dial
Select
Tone — Press to change the outgoing dialing of the outside line in use from dial pulse to
tone signaling.
Unlock Door
Door Unlock — Press to unlock a door lock mechanism.
Table 25 Programmable Feature Button Labels
Code
Feature
Name
1 2 3 4 5 6 7 8 9 10 11 12
LCD
Default
Label
User
Can
Rename
000
Unused
Key
100
Prime DN
Key
E x t . x x x x x
Ext.
XXXXX
(CLID)
Yes
110
Secondary/
Phantom
DN Key
E x t . x x x x x
Ext.
XXXXX
(Caller ID)
Yes
Table 24 Programmable Feature Button Definitions (continued)
Button Definitions