Initialize – Toshiba Strata CIX IP5000-UG-VB User Manual
Page 186
Administrator Programming
IP5131-SDL Settings
168
Strata CIX IP5000-series Telephone UG 04/09
Initialize
Select Configuration > Initialize. The Initialize screen
displays.
The general operation on the Initialize screens is as
follows:
•
To view details of an item displayed on the screens
above, press the soft key that corresponds to that item.
•
You can toggle between all the items found on the
Initialize screen, except All Data. The item selected is
underlined.
•
Selecting the All Data soft key selects all the items displayed on the Initialize
screen and all items are underlined.
Important!
Pressing the “All Data” key twice will not cancel the selection.
•
Pressing the EXEC soft key while “Network” is displayed underlined will initialize
the selected item and will rewrite the NV-RAM data and cause the screen to move
to the Resetting Selection Screen. (The Resetting Selection Screen will be
described later.)
•
Pressing the EXEC soft key any item except “Network” is displayed underlined
will rewrite the NV-RAM data and go to the Configuration screen.
•
If no setting change is made to the items and the EXEC key is pressed, the NV-
RAM data will not be rewritten and goes to the Configuration screen.
•
Pressing the CANCEL soft key will not initialize and goes to the Configuration
screen.
•
shows the Initial values of Settings:
Initialize
All Data
Network
Sound
Browser
LCD
Key Repeat
Others
Factory
[Cancel]
Config
[Exec]