beautypg.com

Advanced network settings – Toshiba Strata CIX IP5000-UG-VB User Manual

Page 163

background image

Administrator Programming

IP5131-SDL Settings

Strata CIX IP5000-series Telephone UG 04/09

145

Advanced Network Settings

To access the Advanced Network Setting screens

1. Press

Hold

+

3

+

6

+

9

(simultaneously).

2. Press Advanced softkey, the Advanced Setting screen appears.

Note

There are three screens for Advanced Settings (shown below). Use the

and

soft keys to move from one screen to another.

The general operation on the Network Settings screens is as follows:

To view details of an item displayed on the screens above, press the soft key that
corresponds to that item.

Press the Set soft key to rewrite the NV-RAM data if any setting of a minor item is
changed. The screen will move to the Resetting Selection Screen. (The Resetting
Selection Screen will be described in detail later.)

Press the CANCEL soft key to cancel all the intended setting changes in the minor
items and to go to the IP Configurations screen without rewriting the NV-RAM
data.

Advanced Setting

P-DNS : 0. 0. 0. 0

S-DNS : 0. 0. 0. 0

GRQ Port : 0

RRQ Port : 0

AP Addr : 0. 0. 0. 0

[Set]

(1/3)

[Cancel]

Config

Advanced Setting

Admin_U : 0. 0. 0. 0

Admin_L : 0. 0. 0. 0

User ID : 9999

Password : ****

Dynamic Port

[Set]

(2/3)

[Cancel]

Config

Advanced Setting

VLAN : Disable

Phone VLAN ID : 1

[Set]

(3/3)

[Cancel]

Config

PC Port Type: Access

PC Port VLAN ID : 1

VLAN : Disable

This manual is related to the following products: