beautypg.com

Tripp Lite B051-000 User Manual

Page 2

background image

1

2

3

4

5

Supported Operating Systems

Supported Browsers

Front View

• Supported operating systems for computers/servers that are connected to the B051-000,

or are connected to a KVM switch that is connected to the B051-000, are shown in the
table below:

Supported browsers for users that are
accessing the B051-000 remotely include
the following:

Browser

Version

Internet Explorer

6.0 and higher

Firefox

1.5 and higher

Mozilla

1.7 and higher

Safari

2.0 and higher

Opera

9.0 and higher

Netscape

8.1 and higher

1

LAN Port

The Cat5e/6 cable that connects the B051-000 to a network plugs
in here.

2

Reset Switch

1. Pressing and releasing this switch will perform a system reset.
2. Pressing and holding the switch for more than 3 seconds restores
the B051-000 to its factory default configuration settings.
3. Pressing and holding this switch while powering the unit on will
restore the factory default firmware version. This operation should
only be performed in the event of a firmware upgrade failure that
results in the device becoming inoperable.

Note: This switch is recessed and must be pushed with a thin object, such as the end of
a paper clip or ballpoint pen.

3

10/100 Mbps LED

This LED lights Orange to indicate a data transmission speed of
10Mbps, or Green to indicate a Data transmission speed of
100 Mbps.

4

Link LED

This LED flashes Green to indicate that the B051-000 is being
accessed remotely.

5

Power LED

This LED lights Orange when the B051-000 is powered-on and
ready to operate.

Operating System

Version

Windows

2000 and higher

Linux RedHat

7.1 and higher

Linux Fedora

Core 5 and higher

Linux SuSE

9.0 and higher

Linux Mandriva
(Mandrake)

9.0 and higher

Operating System

Version

UNIX AIX

4.3 and higher

UNIX FreeBSD

3.51 and higher

UNIX Sun

Solaris 8 and higher

Novell Netware

5.0 and higher

Mac

OS 9 and higher

DOS

6.2 and higher

Note: The operating systems in the table above are supported by the B051-000 only. Any KVM switch connected to
the B051-000 must be compatible with them as well, or the system will not function properly.

Computer/servers remotely accessing the B051-000 must have Windows 2000 or higher,
or an operating system that is capable of running Sun’s Java Runtime Environment (JRE)
6, Update 3 or higher.

200909082 93-2851.indd 2

10/27/2009 3:41:20 PM