Power specifications, Internal tape drive, Figure 7-2 – Tandberg Data VXA-320 (VXA-3) User Manual
Page 67: Table 7-7, Al tape drive
O
CTOBER
2006
VXA-320 T
APE
D
RIVE
53
P
OWER
S
PECIFICATIONS
P
OWER
S
PECIFICATIONS
This section lists the power specifications for the VXA-320 tape drive.
I
NTERNAL
T
APE
D
RIVE
The power specifications listed in this section are in addition to any
requirements for the enclosure in which it is installed.
Power Connector Pin Assignments
The VXA-320 power connector is compatible with power cables used for
standard 5.25-inch half-high devices. The enclosure’s power cable connector
must be an AMP 1-480424-0 series, or equivalent.
provides pin
assignments for the tape drive’s power connector.
Figure 7-2 Physical dimensions of the external tape drive
226.8
(8.93)
85.85
(3.38)
285.8
(11.25)
3
Table 7-7 Pin assignments for the power connector
Pin
Assignment
1
+12 VDC
2
Ground, 12 VDC return
3
Ground, 5 VDC return
4
+5 VDC