Trane PTAC-SVX01C-EN - Manual (Page 3)

PTAC-SVX01C-EN 3
*All heat pump units must have electric heat.
Digit 8—Main Power Supply
1 = 230-208V/60Hz/1phase
2 = 265V/60Hz/1phase
4 = 115V/60Hz/1phase (Hydronic Only)
Digit 9 —Electric Heat Capacity*
U = Universal Heater (Heater kW determined by
power cord, see Accessories Section)
W = Hydronic (ships with no front cover & no
electric heater)
Digit 10 — Unit Features
A = Standard
C = Corrosion Resistant
D = Internal Condensate Pump
Digit 11—Minor Design Sequence
Model Number Description
P T E E 0 9 0 1 * A A
1 2 3 4 5 6 7 8 9 10 11
Each Packaged Terminal Air
Conditioner/Heat Pump is assigned a
multiple-character alphanumeric
model number that precisely
identifies each unit.
An explanation of the identification
code that appears on the unit
nameplate is shown below.
The model number helps owner/
operator, installing contractors, and
service technicians to define the
operation, components and options
for a specific unit. Refer to the model number printed
on the equipment nameplate when
ordering replacement parts or
requesting service.
Front and discharge grille
Electric heater
Indoor Fan
Display Module
Outdoor fan
Wall sleeve
Outdoor grille
Outdoor coil
Rotary compressor
Power cord coverplate (not shown)
Power cord
Control box
Indoor coil
Digits 1, 2—Packaged Terminal Air Conditioner
Digit 3—Product Type
E = Air Conditioner with auxiliary heat
H = Heat Pump
Digit 4—Development Sequence
E = Fifth Development Series
Digit 5, 6, 7—Unit Cooling Capacity
070 = 7,000 Btu
090 = 9,000 Btu
120 = 12,000 Btu
150 = 15,000 Btu