Toshiba e-STUDIO382p - Manual (Page 8)

Network configuration > 8
A
DJUSTING PRINTER SETTINGS
The network addresses used in this manual are shown as examples only. Network
addresses used in your installation must be generated from your own network.
1.
Launch the Web browser and enter the IP Address of the network interface card in
Address (Location/Position) and press the Enter key.
You can find the IP address on the Network Information page, refer to
“Configuration
settings” on page 6 .
The printer Web Page is displayed.
2. To access and adjust printer control settings, such as printer, network, security and
maintenance, click the Administrator Login button in the left-hand pane.
3. Enter the username, admin and password (default password is aaaaaa).
4. As this is the first time logging into the Printer Web Page, the Printer Identification
(basic setup) page is launched. You have two options:
> You can enter the printer location, asset number, administrator name and select
“Do not show this page again”. Click OK to save these details. Allow a few
seconds for the settings to save and the printer to restart automatically.
> If you do not wish to enter any details, click SKIP.
5. The Printer Web Page with full menu options opens up. Browse the menu and update
information as appropriate.
NOTE
On the web page you can view printer status, job lists and links. You can also
configure the IP Address, Subnet Mask and Gateway for the network card.
However, to configure printer settings, you need to log in as “admin” and enter
the correct password to be able to configure all items.