Toshiba e-STUDIO382p - Manual (Page 6)

Network configuration > 6
C
ONFIGURATION SETTINGS
With the machine power switched on, print out the Network Information page:
1.
Press the OK button.
2. If required, use the Menu up/down buttons to navigate to the INFORMATION MENU
then press the OK button to select.
3. Use the Menu up/down buttons to navigate to NETWORK then press the OK button
to select.
4. Press the OK button once more to execute.
On the first page of the Network Information that is printed out, under the heading “General
Information” the MAC or Ethernet Address is given. For example:
MAC Address 00:80:87:D4:FA:00
The Ethernet address is therefore 00:80:87:D4:FA:00
C
ONFIGURATION UTILITIES
You can configure the network interface card (NIC) by using one of the following methods:
UTILITY FEATURES SYSTEM REQUIREMENTS
Network Card Setup Configure the NIC by
launching or installing
the Network Setup
utility. This utility allows
you to:
Enable/disable the
Printer settings Web
Page.
Set IP address, Subnet
Mask and Gateway for
TCP/IP manually or by
using DHCP. Windows:
Windows 2000
Windows XP Home/Professional
Windows XP Professional x64 Edition
Windows Server 2003
Windows Server 2003 x64 Edition
Windows Server 2008
Windows Server 2008 x64 Edition
Windows Vista 32-bit
Windows Vista 64-bit
Windows 7 32-bit
Windows 7 64-bit
Windows Server 2008R2
Mac:
Mac OS X 10.3.9 or greater
You need to install Rosetta if using
Mac OS X 10.6.
Web Browser Configure the NIC and
printer by using a Web
browser such as
Microsoft Internet
Explorer or Mozilla
Firefox. Microsoft Internet Explorer or similar.
SNMP The machine and
network card can be
controlled using third-
party vendor developed
SNMP application. Third-party vendor developed SNMP
application.