Paper menu – Tally Genicom mL450 User Manual
Page 91
May 04
Publication No. GEG-99197
TallyGenicom mL450 Laser Printer User Manual
4-9
Pushbuttons
Paper Menu
The Paper Menu provides access to the printer settings for various paper-handling functions. Use
the following procedure to enter the paper menu:
1.
Press the MENU button on the control panel.
2.
Press the NEXT button until the text “Paper Menu” is shown on the second line of the dis-
play.
3.
Press the SELECT button to enter the Paper Menu.
4.
Press the NEXT button to move through the submenus.
5.
Use the procedures in the following table to access and change the printer paper-handling
settings:
Submenus
Default Setting
Available Settings
Procedure for Changing Setting
Copies
This submenu allows
you to change the
number of copies
printed.
1
Numbers 1 - 999
1. Press NEXT or PREVIOUS to increase
or decrease the number of copies
printed.
2. Press SELECT to save this setting.
Duplex
This submenu allows
you to turn the duplex
on or off.
Off
On/Off
1. Press NEXT or PREVIOUS to toggle
between ON and OFF.
2. Press SELECT to save this setting.
Duplex Bind
This submenu allows
you to choose
between LEF (Long
Edge Feed) and SEF
(Short Edge Feed).
LEF
LEF/SEF
1. Press NEXT or PREVIOUS to toggle
between LEF and SEF.
2. Press SELECT to save this setting.
Default Source
This submenu allows
you to choose a
default paper source
from a list of all
installed sources.
Tray 1
MBF
Tray 1
Tray 2
Tray 3 (optional)
Tray 4 (optional)
Tray 5 (optional)
1. Press NEXT or PREVIOUS to scroll
through the list of available sources of
paper.
2. Press SELECT to set a source as the
default.
Manual Feed
This submenu allows
you to turn the manual
feed on or off.
Off
On
Off
1. Press NEXT or PREVIOUS to toggle
between ON and OFF.
2. Press SELECT to save this setting.
Output Tray
This submenu allows
you to choose a
default output tray
from a list of all
installed output trays.
Face Down Tray
Face Down Tray
Stacker (optional)
1. Press NEXT or PREVIOUS to scroll
through the list of available output
trays.
2. Press SELECT to set a tray as the
default.