Tally Genicom mL450 User Manual

Page 178

Publication No. GEG-99197

May 04

7-6

TallyGenicom mL450 Laser Printer User Manual
Installing a FLASH DIMM Module

Carefully insert a FLASH DIMM module in FLASH DIMM slot as shown below. When

properly seated, gently push down on the DIMM until the white braces close onto the ends

of the DIMM.

NOTE:

To remove the FLASH DIMM, pull the white braces away from the ends of the DIMM until the
DIMM snaps out of the slot.

Reinstall the controller assembly. Once firmly in place, push and hand tighten the thumb-

screws in a clockwise direction.