Tally Genicom mL450 - Manual (Page 215)

May 04 Publication No. GEG-99197
TallyGenicom mL450 Laser Printer User Manual 7-43
Disabling the Serial Interface
XON Error
DTR Polarity
RTS Polarity
Robust XON
Disabling the Serial Interface
The following selection becomes available within the PORT submenu of the INTERFACE menu
when the RS-232C/RS-422 serial interface is installed.
Serial
The Serial option enables you to turn off the serial port on the interface. This selections is often
used to permit uninterrupted communication to other ports such as the parallel or other network
ports.
References for OpenVMS users
You can print to your laser printer via the serial interface option from an OpenVMS system, either
directly connected to the system or through a network device such as a terminal server.
It is recommended that DECprint Supervisor (DCPS) be used for printing. Please see the “Setting
Up Printers” chapter of the DCPS System Manager's manual for information on creating a DCPS
print queue.
If DCPS will not be used, please see the “Setting Up and Maintaining Queues” chapter of the
OpenVMS System Manager's manual for information on setting up print queues using the Open-
VMS print symbiont.
AVAILABLE SELECTIONS Off
On
DEFAULT Off
AVAILABLE SELECTIONS High
Low
DEFAULT High
AVAILABLE SELECTIONS High
Low
DEFAULT High
AVAILABLE SELECTIONS Off
On
DEFAULT Off
AVAILABLE SELECTIONS On
Off
DEFAULT On