Toshiba Uninterruptible Power System G8000 Series - Manual (Page 23)

22
8.2 Transportation by a forklift
Space for the forks is provided underneath the UPS. Insert the forks into the space shown in
Figure 8.6.
Make sure forklift’s maximum load is enough to carry UPS. Refer to chapter 7 “Dimension and Weight”
for UPS weight.
Ensure that the UPS does not swing or tilt. Then lift and transport the UPS Minimize the impact of a
sudden stop when lowering the UPS to a resting surface.
Fix the forks up against the base
(If possible)
Insert the forks here
Base
< 100~225kVA >
Insert the forks here
< 250/300kVA >
Figure 8.6 -
Transportation by a forklift