Toshiba Strata DK8 User Manual
Page 312
REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-62-
NOTES:
1. To cancel a message set via Mode 95, use Mode 97 procedure.
2. [M] represents the message entered.
3. DKT = digital telephone; EKT = electronic telephone.
TABLE RM-BO
MODE 95
REMOTE CALLING STATION MESSAGING (ADD/REVIEW/CHANGE)
ACTION
STEP
DISPLAY/PRINTOUT
1
>MODE MESG
Enter the Message Mode
At the >MODE prompt, enter
M E S G CR
.
2
m 95
To Add Or Review a Calling Station Message
3
Set the terminal keyboard to the lower case (cap lock off) and
enter
m 9 5
.
4
m95 XXX
5
Enter
p
(p = page command and
= 2-digit message memory location: 10 ~ 19 personal
messages and 60 ~ 99 = system message).
6
To Change Previous Message
7
To Set the Message on DKT or EKT XXX’s LCD
To Exit the Message Mode
m 0
q
> MODE
Enter
X X X
(XXX = station number where the message will be
set and stored).
m95 XXX p [M]
Set the terminal keyboard to upper case and change message
(alphanumeric, 32 characters max.).
Set the terminal keyboard to lower case and enter
p m 0
.
At any time, enter
m 0 q
(lower case).
NOTE:
Enter “m” anytime it is desired to start over in this procedure.
NOTES:
1.
2.
To store system messages permanently, DKT or EKT XXX
must be the station at port 00.
After
p
is entered, the previously stored message is
displayed. If there is no stored message, nothing is displayed.
m95 XXX p [M+]
m95 XXX p [M+] p
m 0
Zero