Toshiba Strata DK8 - Manual (Page 283)

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-33-
TABLE RM-AB
PROGRAM 34
HOLD RECALL TIMING
ACTION STEP DISPLAY/PRINTOUT
1 >MODE PROG Enter the Program Mode
At the >MODE prompt, enter
P R O G CR .
2 P 34
P34
Enter Program Number 34
Press
CR .
3 P34 05 Refer to the record sheet and enter the required
port number.
Example: Port 05, enter
0 5 .
4 Press # . The present data will be displayed. P34 05# 032
5 Refer to the record sheet and enter the required timing.
Example: 160 seconds, enter
1 6 0 .
6 P34 05# 032 160
P34 ##
P
To Exit Program/Store Data
A)
B)
C)
P
P34 05# 032 160
To store data, press CR .
Continue returning to step 3 until all Program 34
data has been entered.
To exit this program, press
# # CR .
NOTE:
, use Type 2 procedure.
Program 35
TABLE RM-AC
PROGRAM 36
FIXED CALL FORWARD
ACTION STEP DISPLAY/PRINTOUT
1 >MODE PROG Enter the Program Mode
At the >MODE prompt, enter
P R O G CR .
2 P 36
P36
Enter Program Number 36
Press
CR .
3 P36 00 Refer to the System Record Sheet and enter the
port number for the station that will have a Fixed
Call Forward button. Example: Port 00, enter
0 0 .
4 Press # . The present data will be displayed. P36 00# NN
5 Refer to the System Record Sheet and enter
the port to be forwarded to when the Fixed
Call Forward button is pressed. Example: Port 04, enter
0 4 .
P
P36 00# NN 04
6 P36 00# NN 04
P36 ##
P
To Exit Program/Store Data
A)
B)
C)
To store data, press CR .
Continue returning to step 3 until all Program 36
data is entered.
To exit this program, press
# # CR .