Toshiba Strata DK8 - Manual (Page 294)

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-44-
TABLE RM-AN
PROGRAM 44 (A OR B)
TOLL RESTRICTION TRAVELING CLASS OVERRIDE CODE ENTRY
ACTION STEP DISPLAY/PRINTOUT
1 >MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter
P R O G CR .
2 P 44
P44
Enter Program Number 44 (Do not enter A or B)
3 P44 1 NNNN
P44 1 NNNN 3456
P44 ##
P
Refer to the System Record Sheet and enter the required Toll
Restriction Class number (1 ~ 4).
Example: Class 1; Enter:
1 .
The system will display the present override code assigned to
that class number.
5 To Exit Program/Store Data
A) To store data, press
CR .
B) Continue returning to step 3 until all Program 44 data
is entered.
C) To exit this program, press # # CR .
Press CR .
4 Refer to the System Record Sheet and enter the required override
code number.
Example: 3456; Enter
3 4 5 6 .
P44 1 NNNN 3456
TABLE RM-AO
PROGRAM 45-1
TOLL RESTRICTION DIAL PLAN
ACTION STEP DISPLAY/PRINTOUT
1 >MODE PROG
P
Enter the Program Mode
At the >MODE prompt, enter
P R O G CR .
2 Enter Program Number 45
Press
CR .
3 P45 1 1
The system will display the present dial plan code number (1 ~ 5).
4 P45 1 1 2
5 P45 1 1 2
P45 ##
P
To Exit Program/Store Data
A) To store data, press CR .
B) To exit this program, press # # CR .
P 45
P45
Refer to the record sheet and enter the required code number.
Example: Code 2, enter
2 .
Enter the number 1.