Transition Networks POINTSYSTEM CPSMC0810-100 - Manual (Page 9)

9
CPSMC08xx-100 PointSystem ™ Chassis
slide-in-modules
24 hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
2.2 Management Modules
Optional network management is provided by SNMP software embedded in
Transition Networks
PointSystem ™ management module(s) that can be installed in
the CPSMC08xx-100 chassis.
Transition Networks provides two such modules:
• CPSMM-120 Single-Slot Master Management Module.
• CPSMM-200 Dual-Slot Master Management Module.
Along with an additional expansion module:
• CPSMM-210 Single Slot Expansion Management Module
2.2.1 Three Types of Management Modules
CPSMM-120 Single-Slot Master Management Module
The optional CPSMM-120 Single-Slot Master Management Module can
be installed to enable network management of a single CPSMC08xx-
100 chassis .
Refer to the CPSMM-120 user’s guide for more information on the
CPSMM-120 Single-Slot Master Management Module.
CPSMM-200 Dual-Slot Master Management Module
The optional CPSMM-200 Dual-Slot Master Management
Module can also be installed in the CPSMC08xx-100 chassis to
enable network management.
This module has all of the features of the CPSMM-120 plus a pair
of cascade ports, which allow multiple
PointSystem ™ chassis to
be connected.
Note also that this module requires two adjacent slots in the
CPSMC08xx-100 chassis for installation.
Refer to the CPSMM-200/-210 user’s guide for more information
on the CPSMM-200 Dual-Slot Master Management Module.
CPSMM-210 Single-Slot Expansion Management Module
The CPSMM-210 is used with the CPSMM-200 to connect up to eight (8)
PointSystem™chassis into one manageable stack.
Refer to the CPSMM-200/-210 user’s guide for more information on the
CPSMM-210 Single-Slot Expansion Management Module.
See section 4.3 Cascade Option for details on connecting multiple
CPSMC08xx-100 chassis.
10BASE-T
RX
TX
LNK
PWR
RESET
SERIAL
CPSMM120
10BASE-T
IN
CPSMM200
OUT
RX
TX
LNK
PWR
RESET
DB-9
RESET
CPSMM210
Power
IN
OUT