beautypg.com

Texas Instruments TMS320C674X User Manual

Page 11

background image

www.ti.com

Related Documentation From Texas Instruments

SPRUGM7

OMAP-L138 Applications Processor System Reference Guide. Describes the

System-on-Chip (SoC) including the ARM subsystem, DSP subsystem, system memory, device
clocking, phase-locked loop controller (PLLC), power and sleep controller (PSC), power
management, ARM interrupt controller (AINTC), and system configuration module.

SPRUFK9

TMS320C674x/OMAP-L1x Processor Peripherals Overview Reference Guide. Provides

an overview and briefly describes the peripherals available on the TMS320C674x Digital Signal
Processors (DSPs) and OMAP-L1x Applications Processors.

SPRUFK5

TMS320C674x DSP Megamodule Reference Guide. Describes the TMS320C674x digital

signal processor (DSP) megamodule. Included is a discussion on the internal direct memory access
(IDMA) controller, the interrupt controller, the power-down controller, memory protection, bandwidth
management, and the memory and cache.

SPRUFE8

TMS320C674x DSP CPU and Instruction Set Reference Guide. Describes the CPU

architecture, pipeline, instruction set, and interrupts for the TMS320C674x digital signal processors
(DSPs). The C674x DSP is an enhancement of the C64x+ and C67x+ DSPs with added
functionality and an expanded instruction set.

SPRUG82

TMS320C674x DSP Cache User's Guide. Explains the fundamentals of memory caches

and describes how the two-level cache-based internal memory architecture in the TMS320C674x
digital signal processor (DSP) can be efficiently used in DSP applications. Shows how to maintain
coherence with external memory, how to use DMA to reduce memory latencies, and how to
optimize your code to improve cache efficiency. The internal memory architecture in the C674x
DSP is organized in a two-level hierarchy consisting of a dedicated program cache (L1P) and a
dedicated data cache (L1D) on the first level. Accesses by the CPU to the these first level caches
can complete without CPU pipeline stalls. If the data requested by the CPU is not contained in
cache, it is fetched from the next lower memory level, L2 or external memory.

11

SPRUFL5B – April 2011

Read This First

Submit Documentation Feedback

© 2011, Texas Instruments Incorporated