Telenetics OM-AMPS-100 - Manual (Page 57)

Appendix A
8-Port Expansion Module Option
OMEGA Installation, Operation, and Maintenance Manual 57
6. Press down the Module gently until it snaps securely into the
card guide connectors (one on each card guide).
7. Insert one end of the supplied short cable into the RJ-11 jack
on the lower-left side of the Module. Insert the other end into
the OMEGA unit’s RJ-11 jack on the unit’s baseboard (see
Figure A-2).
Figure A-2. Connecting the RJ-11 Jacks
8. Plug in all the RJ-11 cables from the external devices (see 5,
“Connecting Endpoint Devices” on page 58).
9. Set the OMEGA Power Battery switch to the ON position and
close the AC fuse connector. Verify that each LED above the
8 RJ-11 jacks on the Module turns green. This color indicates
that the meter ports are onhook and ready for operation.