Telenetics OM-AMPS-100 - Manual (Page 33)

Section 3
Specifications
OMEGA Installation, Operation, and Maintenance Manual 33
Switches and LED Indicators
Toggle switches and LED indicators are provided for installation,
configuration, and troubleshooting.
Switch controls: AC power ON-OFF
Battery ON-OFF
LED Indications: LED 1: AC Power/Battery Condition
LED 2: Cellular Connection Status
Power Supply
The switching power supply is designed to operate from a wide
range of AC input voltages and is isolated against voltage
transients.
AC power input: 90 to 277 VAC,
50 to 60 Hz
DC power input: 100 to 150 VDC
Output DC voltage: 13.2 volt DC +/- 5%, full
load
Maximum output current: 2.0 amperes
Power consumption: Idle: 1.3 Watts
Transmit @ 3 Watts: 16.5
Watts
Primary to secondary insulation: 8,000 volts peak at 60 Hz
Battery charge voltage: 13.8 Volts
Input AC fuse rating: 2 amps Slow Blow, 250V
Primary surge protection: 1500 Watt-seconds
Secondary surge protection: 20 KvA