Telenetics OM-AMPS-100 - Manual (Page 39)

Section 4
Using the Configuration Program
OMEGA Operation, and Maintenance Manual 39
4
Introduction
OMEGA comes with a configuration software program that lets
you:
c
Check the OMEGA’s cellular telephone receive signal
strength.
c
Program a telephone number into OMEGA.
c
Change the System ID (SID) for the OMEGA’s cellular
telephone.
c
Set or change the login password.
This chapter describes how to use the configuration software
program to perform these tasks.
Prerequisites
Before you use the OMEGA configuration software program, you
must:
c
Have a PC equipped with a Microsoft Windows operating
system or MS-DOS.
c
Have a cable with a male DB9 connector on one end for
attaching to the OMEGA serial port; the connector on the other
end attaches to a serial port on your computer.
c
Know the communications (COM) port used by your
computer’s serial port.
c
Contact your local cellular service provider for OMEGA’s
cellular telephone phone number and SID number.