Toshiba TDP-TW355 - Manual (Page 18)

35
Operations
34
■ Displaying two screens (SPLIT function)
This function displays two screens at a time.
Press the remote control’s SPLIT button.
The projected image moves to the left (main
screen), and a new image is displayed to
the right (sub screen). To switch the sub and
main screens, press the remote control's
SWAP button.
To hide the sub screen, press the SPLIT
button again.
Notes
• Sound of the main screen is output.
• Size of the screens and input source of the sub screen can be changed in the
SPLIT menu.
• Compared with the main screen, the sub screen may suffer some slight image
degradation.
• Operating a function other than Mute, Freeze and volume control will release the
SPLIT mode.
• If you use this function on commercial video software, broadcast or cable-
broadcasting except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
■ SPLIT function setting
Pressing the MENU button while two screens are displayed displays the SPLIT menu.
This menu sets up both screens.
To hide the menu, press the
RETURN button.
Sets size of both screens.
Selects the input source for the sub screen.
When the main screen is input from computer or Y/P
B /P R :
Press or , toggle the input with and fix selection
with .
Video/S-video
When the main screen is input from video or S-video:
Press or , toggle the input with
and fix selection
with .
Computer 1 (Digital) / Y/P B /P R 1 (Digital) / Computer 1
(Analog) / Y/P B /P R 1 (Analog) / Computer 2 / Y/P B /P R 2 /
Computer 3 / Y/P B /P R 3 / Wireless/Card / USB memory
Size
Sub input
Item Description
Note
• To enlarge the screen fully, select [ Full ] for [ Size ].
Remote
Control
Using handy features (Continued)
■ Display a sub screen (PIP function)
Another image can be added in smaller size
(referred as sub screen in this manual) to the
projected image (referred as main screen).
Press the remote control’s PIP
button.
A sub screen is displayed in the currently
projected image (main screen).
To swap the main and sub screens, press
the remote control’s
SWAP button.
To hide the sub screen, press the PIP button again.
Notes
• Sound of the main screen is output.
• Input select, display position and size of the sub screen can be changed in the
PIP
menu.
• Operating a function other than Mute, Freeze and volume control will release PIP
mode.
• If you use this function on commercial video software, broadcast or cable-
broadcasting except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
■ Sub screen setting
Pressing the MENU button while the sub screen is displayed displays the PIP menu.
This menu sets up the sub screen.
To hide the menu, press the
RETURN button.
Sets the sub screen size.
Large Medium Small
Sets display position of the sub screen.
Selects the input source for the sub screen.
When the main screen is input from computer or Y/P
B /P R :
Press or , toggle the input with and fix selection
with .
Video/S-video
When the main screen is input from video or S-video:
Press or , toggle the input with
and fix selection
with .
Computer 1 (Digital) / Y/P B /P R 1 (Digital) / Computer 1
(Analog) / Y/P B /P R 1 (Analog) / Computer 2 / Y/P B /P R 2 /
Computer 3 / Y/P B /P R 3 / Wireless/Card / USB memory
PIP size
PIP position
PIP input
Item Description
Remote
Control