TurboChef Technologies Tornado - Manual (Page 36)

26
TIPS FOR PROLONGING OVEN LIFE
DO:
†
Ensure the oven is cleaned daily.
†
Use only TurboChef Oven Cleaner.
†
Remove items from the oven as soon as they
are cooked.
†
Use only microwave-safe TurboChef-approved
cooking accessories in the oven.
†
Review cooking instructions to ensure oven
settings are correct for corresponding products.
†
Call Customer Service (800.90TURBO or
+1 214-379-6000) or your Authorized
Distributor immediately if wave guide covers
are broken.
†
Keep this manual for future reference.
DO NOT:
† x
Lift the oven by its handle.
† x
Slam or mishandle the oven door.
† x
Place foil or metal objects of any kind in the oven.
† x
Operate the oven without food in the cook
cavity.
† x
Frequently open and close the door to check
the product.
† x
Cook items wrapped in plastic or any type of
cling film.
† x
Put products in the oven until ready to cook.
† x
Use cleaning agents that are not approved for
the oven.
† x
Allow any cleaning solution or water to remain
on the cook cavity floor after cleaning or at any
other time.
† x
Place excessive weight on top of the oven.
TROUBLESHOOTING
In order to save time and money, please perform
the following steps prior to calling for warranty
service. Reference Table 1 on page 27.
1. Press the
BACK
key until the oven screen reads
“Cooling Down” or “Oven Off.”
2. Record the serial number (near the top of the
screen).
3. Simultaneously press the “4” and “6” keys to
view the oven faults.
4. Record the cook count (second line on the
screen) and any faults (F1 to F6) that have
occurred.
5. Press the
ENTER
key, and then the “Self-Test”
soft key to initiate an oven self test.
6. Once all subsystems are tested, record which
ones - if any - display a “Fail” message.
7. Press the
BACK
key until the oven screen reads
“Cooling Down” or “Oven Off.”
8. Press the bottom-right soft key to turn on the
oven. Allow the oven to warm up to its set
temperature.
Upon completing the above steps, please have the
information recorded ready when calling Customer
Service at 800.90TURBO/+1 214-379-6000 or
when calling your Authorized Distributor .
MAINTENANCE AND TROUBLESHOOTING