TurboChef Technologies Tornado - Manual (Page 28)

b. Insert food item into cook cavity.
WARNING: Inside of oven is HOT! Insert
food with caution.
c. Close the oven door and press the bottom-left
soft key to test the new settings.
d. Follow steps 5-8 in the section titled
COOKING
INSTRUCTIONS , pages 15-16.
9. Press the bottom-right soft key to save the new
settings. Doing so will permanently replace old
item settings.
10. When done editing recipes, press the
BACK
key
until returned to the
COOLING DOWN
or
OVEN
OFF
screen.
CHANGING THE IDLE IR SET TEMPERATURE
WARNING: The idle IR set temperature is
pre-determined by the menu developer.
Changing this setting is not recommended,
unless performed by the menu developer or
TurboChef Culinary or Engineering staff.
Valid idle IR settings range between 500-1150ºF
(260-620ºC). The temperature will be rounded to
the nearest 50ºF (20ºC) increment.
To change the idle IR set temperature:
1. From the
COOLING DOWN
or
OFF
mode, simulta-
neously press the
BACK
and
ENTER
keys.
2. Enter the code 9-4-2-8 (W-H-A-T) and press
ENTER
.
3. Press the
DOWN
key to scroll to screen 2 of the
TEST
mode.
4. Press the soft key adjacent to “IR SI” (bottom-
right soft key) and press
ENTER
.
5. Using the Numeric Keypad, enter a new idle IR
set temperature.
6. Press
ENTER
to confirm the change.
7. Continually press the
BACK
key to return to the
COOLING DOWN
/
OFF
mode.
As a general rule, the idle IR set temperature
should be the average of all food item IR set
temperatures (typically 1000ºF). This prevents the
IR element from having to drastically warm up or
cool down between cook cycles.
ENABLING/DISABLING THE EDIT MODE
The
EDIT
mode can be disabled to prevent
unauthorized editing of food items/cook cavity set
temperature.
To enable/disable the
EDIT
mode:
1. From the
COOLING DOWN
or
OFF
mode,
simultaneously press the
UP
and
DOWN
keys.
2. Enter the code 8-4-3-3 (T-I-D-E) and press
ENTER
.
3. When prompted, pressing “9” will enable
EDIT
mode. Pressing any other numeric key will
disable
EDIT
mode.
COOKING OPTIONS - TIME, DONE, AND SNOOZE
The “Enter Cook Time” Screen
Enable the
ENTER COOK TIME
screen to provide the
option to change the cook time of a recipe before a
cook cycle initiates (see page 15).
To enable/disable the
ENTER COOK TIME
screen:
1. From the
COOLING DOWN
or
OFF
mode, simul-
taneously press the
BACK
and
ENTER
keys.
2. Enter the code 8-4-6-3 (T-I-M-E) and press
ENTER
.
3. When prompted, pressing “9” will enable the
ENTER COOK TIME
screen. Pressing any other
numeric key will disable the
ENTER COOK TIME
screen.
18 OPERATING THE TORNADO OVEN