Toshiba TDP-P75 - Manual (Page 33)

Operation 33
English
* Tint can be displayed and adjusted only when the video signal is set to NTSC or
NTSC 4.43.
2. Display setting menu
Some picture adjustments are available only when certain input ports are in use.
Unavailable adjustments are not shown on the screen.
H-position
Adjusts the horizontal
position of the projected
image.
V-position
Adjusts the vertical
position of the projected
image.
Phase
This function allows you to adjust the
clock phase to reduce image distortion.
Frequency
Adjusts the horizontal width of the image.
Color
Increases or decreases the color intensity of the image.
Tint
Adjusts the color tones of the image.*
Sharpness
Adjusts the image to make it look sharper or softer.
-30 +30
-30 +30
FUNCTION DESCRIPTION
Volume
Adjusts the volume level.
OSD Time
Sets the length of time the OSD will remain active after your
last button press. The range is from 5 to 60 seconds.
Reset all
Returns all settings to the factory preset values.
Screen size
Makes the best fit of the image to the screen.
1. Full 2. Through
Aspect ratio
There are two aspect ratio settings.
1. 4 : 3 (Standard) 2. 16 : 9 (Wide screen)